SOLAR BATTERY

Photovoltaic public lighting systems, ground signal lights
Throughout its 30 years of experience in the production of batteries for renewable energy applications, ASSAD has developed a wide range of products with different technologies which are optimized for deep discharge cycles and are highly reliable.

These products have proven their worth in several applications such as photovoltaic public lighting systems, solar signal lights, solar pumping and solar systems for isolated sites.

Monobloc

OPZS

OPZV

slp

Lead-acid batteries with positive flat plates, designed for use in photovoltaic street lighting systems, solar traffic lights, solar pumping and solar systems in remote locations.

  • 12V monoblock: capacity from 100 Ah to 200 Ah/ C100 to 1.85V at 20° C.
  • Minimum maintenance (Large electrolyte reserve).
  • Over 1000 cycles at 35% depth of discharge (DOD).
  • Complies with the IEC 61427 standard (General requirements and test methods).
  • Number of cycles in accordance with the IEC 60896-21/22 standard.

SLG

VRLA GEL batteries, with positive flat plates, designed for use in photovoltaic street lighting systems, solar traffic lights, solar pumping and solar systems in remote locations.

  • 6V – 12V monoblock: capacity from 70 Ah to 220 Ah/ C100 to 1.85V at 20° C.
  • Maintenance-free GEL battery.
  • Over 1000 cycles at 35% depth of discharge (DOD).
  • Complies with the IEC 61427 standard (General requirements and test methods).
  • Number of cycles in accordance with the IEC 60896-21/22 standard.

SDV

Lead-acid batteries with positive tubular plates, designed for use in photovoltaic street lighting systems, solar traffic lights, solar pumping and solar systems in remote locations.

  • 2V series-connected elements in a metal compartment (6V -12V battery: capacity from 200 Ah to 420 Ah/ C100 to 1.85V at 20° C.).
  • Minimum maintenance (Large electrolyte reserve).
  • 3000 cycles at 35% depth of discharge (DOD).
  • Complies with the IEC 61427 standard (General requirements and test methods)
  • Number of cycles in accordance with the IEC 60896-21/22 standard.

opzs

The PowerSafe TS range provides a solution which optimizes performance and service life for all the applications related to renewable energies. The components of the PowerSafe TS range use a die-casted and lead-acid Tubular Positive Plates Technology. It is particularly suitable for installations on Photovoltaic generators in remote locations.

  • 2V elements: capacity from 300 Ah to 4580 Ah/ C120 to 1.85V at 25° C.
  • Frequency of annual water replenishment.
  • 3500 cycles at 35% depth of discharge (DOD).

opzv

The elements of the PowerSafe® OPzV range are optimized for cycling operation and are particularly efficient in the slow discharge mode. Their design, which brings together the Valve Regulated Lead Acid (VRLA) technology with die-cast positive tubular plates, offers a package of exceptional benefits in a single unit. This range was specially developed for renewable energy applications, particularly for self-contained solar generators.

  • 2V elements: capacity from 296 Ah to 4408 Ah/ C120 to 1,85V at 25°C.
  • Maintenance-free GEL battery.
  • 4000 cycles at 35% depth of discharge (DOD).
  • Containers and covers in SAN.
  • Complies with the international DIN 40742 and CEI 62485-2 standards.

PRODUITS

Depuis les années 80 le groupe ASSAD a commencé la commercialisation et la fabrication de plusieurs gammes de Batteries Industrielles à travers des filiales dédiées à cette activité.
Traction
Chariots et Transpalettes électriques, Autolaveuses et autres engins électriques...
Solaire
Systèmes d’éclairage public photovoltaïque, les feux de signalisation solaires, pompage...
Stationnaire
TELECOM,
UPS et
Energie de secours...
Accessoires
Chargeur de batteries,
connecteurs, système
de remplissage…